|
 Polymer and Resins TMA
 Description
This TMA was specifically developed to measure the CTEs of
Polymers and Resins in the temperature range -30 to +70°C.
The instrument is built into a very compact nicely designed
housing, where all necessary components are included.
The sample can be inserted after the protecting cover is opened
from the top of the instrument. The sample is loaded between a fixed point and a
moveable push rod out of quartz glass, which is connected to a high precision
LVDT sensor, with 10nm / 1,25nm/digit resolution.
Sample dimensions of maximum 50 mm length and 8, 5 mm diameter are
possible. An option is available, so that the hardening processes of Resins can
be measured.
|
TMA -
PT10 |
Temperature
Range |
-30 to
+70°C |
Max. sample
size |
50
mm (L) , 8,5
mm (D) |
Measurement
precision |
+/-
0.1% |
Resolution |
0.2nm |
RMS
Noise |
3.5nm |
Dynamic
baseline drift |
<1µm |
Force range
|
0.001 to 1
N |
Force
resolution |
0.001
N |
Mass Flow
Control |
Optional |
Atmosphere |
Air |
Operation
Modes |
|
Standard |
Included |
Optional |
|
DTA
feature |
Optional |
|
|